| Process | SAND | SAND | SAND | SAND | SAND | SAND | SAND | SAND | PERM | SAND | SAND | SAND | SAND | SAND |
| Alloy | 319 | 319 | 356 | 356 | 356 | 356 | 535 | 713 | 319 | 319 | 333 | 356 | 356 | 356 |
| Heat Treat | F | T-6 | F | T-51 | T-6 | T-7 | F | T-6 | T-6 | F | T-51 | T-6 | ||
| Chemical Composition (in '%') | ||||||||||||||
| Silicon | 5.5-6.6 | 5.5-6.7 | 6.5-7.5 | 6.5-7.6 | 6.5-7.7 | 6.5-7.8 | 0.15 | 0.25 | 5.5-6.6 | 5.5-6.7 | 8-10 | 6.5-7.5 | 6.5-7.6 | 6.5-7.7 |
| Iron | 1 | 2 | 0.6 | 0.6 | 0.6 | 0.6 | 0.15 | 1.1 | 1 | 2 | 1 | 0.6 | 0.6 | 0.6 |
| Copper | 3.0-4.0 | 3.0-4.0 | 0.25 | 0.25 | 0.25 | 0.25 | 0.05 | 0.4-1.0 | 3.0-4.0 | 3.0-4.0 | 3.0-4.0 | 0.25 | 0.25 | 0.25 |
| Manganese | 0.5 | 0.5 | 0.35 | 0.35 | 0.35 | 0.35 | 0.1-0.25 | 0.6 | 0.5 | 0.5 | 0.5 | 0.35 | 0.35 | 0.35 |
| Magnesium | 0.1 | 0.1 | 0.2-0.45 | 0.2-0.46 | 0.2-0.47 | 0.2-0.48 | 6.2-7.5 | 0.2-0.5 | 0.1 | 0.1 | 0.05-0.5 | 0.2-0.45 | 0.2-0.46 | 0.2-0.47 |
| Chromium | 0.35 | |||||||||||||
| Nickel | 0.35 | 0.35 | 0.15 | 0.35 | 0.5 | |||||||||
| Zinc | 1 | 1 | 0.35 | 0.35 | 0.35 | 0.35 | 7.0-8.0 | 1 | 1 | 1 | 0.35 | 0.35 | 0.35 | |
| Titanium | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.1-0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 |
| other | 0.5 | 0.5 | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | 0.25 | 0.5 | 0.5 | 0.5 | 0.15 | 0.15 | 0.15 |
| Strength (in 1000 lbs) | ||||||||||||||
| Tensile ultimate | 23 | 31 | 19 | 23 | 30 | 31 | 35 | 32 | 28 | 34 | 35 | 21 | 25 | 33 |
| Yield | 13 | 20 | 13 | 16 | 20 | 29 | 18 | 22 | 14 | 27 | 30 | 13 | 20 | 22 |
| % Elongation | 1.5 | 105 | 2 | 2 | 3 | 2 | 9 | 3 | 1.5 | 2 | 1.5 | 3 | 2 | 3 |
| Brinell | 55-85 | 65-95 | 40-70 | 45-75 | 55-90 | 60-90 | 60-90 | 60-90 | 70-100 | 75-105 | 85-115 | 40-70 | 55-85 | 65-95 |
| Characteristics (a=excelent, f=poor) | ||||||||||||||
| Pressure tight | b | b | a | a | a | a | f | d | b | b | b | a | a | a |
| Heat treated | yes | yes | yes | yes | yes | yes | no | no | yes | yes | yes | yes | yes | yes |
| Corrosion rest. | c | c | b | b | b | b | a | c | c | c | c | b | b | b |
| Machineabiliy | c | b | c | b | b | b | a | a | c | b | c | c | a | a |
| Polishing | d | d | d | d | d | d | a | a | d | d | c | d | d | d |
| Anodizing | d | d | d | d | d | d | a | a | d | d | d | d | d | d |
| Weldability | b | b | a | a | a | a | d | d | b | b | c | a | a | a |
| Physical Properties | ||||||||||||||
| Electric conduct | 27 | 27 | 39 | 39 | 39 | 39 | 23 | 30 | 27 | 27 | 29 | 39 | 39 | 39 |
| Thermal conduct | 0.260 | 0.260 | 0.360 | 0.360 | 0.360 | 0.360 | 0.240 | 0.290 | 0.260 | 0.260 | 0.290 | 0.360 | 0.360 | 0.360 |
| Density | 0.101 | 0.101 | 0.097 | 0.097 | 0.097 | 0.097 | 0.094 | 0.102 | 0.101 | 0.101 | 0.1 | 0.097 | 0.097 | 0.097 |
| Notes | ||||||||||||||
| Chemcal
specifications are in percents. Strength numbers in 1000's pounds Characteristics are graded A = Excelent, B = Good, C = Average, D = Fair, F = Poor Sand = Sand Casting, Perm = Permanent mold casting |
||||||||||||||